Pixelwhip rev4 Key Features

Grip
  • slip resistant
  • impact protective (you, people around you, and the whip - fiber wielding style)
  • comfortable
  • removable & replaceable
Handle Taper
  • ergonomic thumb placement
Fiber Head
  • Easily Removable
18650 Battery
  • 6-8 hours depending on color modes used
  • changing out battery is EASY
  • high-tension battery contact springs. two springs instead of one allow for shock absorption and maintaining contact while in motion.
Button
  • easy to press
  • doesn't fall out
  • single button control for power - saving the last pattern you were on
  • single click through
  • comfortable position for average hand at thumb
  • indented ring to feel where button is
  • not easy to accidentally change and turn on in bag
Color Modes
  • 4 styles
  • 10 patterns each
  • see this page for color modes
O-Ring
  • water sealed
  • won’t unscrew
LED
  • bright 3-WATT RGB LED
Fibers
  • precision polished highly efficient optical coupling - placed for optimal capturing of light
  • smooth swivel-head bearing
  • structure of fiber epoxy is very strong
  • .75mm
  • 80 fibers +- a couple
  • precision curved surface as a bend guard - designed to the minimum bend radius if they get smashed flat on a table they curve perfectly along - light reflector at base of fiber (has a distinct look)
  • fibers come pre-lubed with premium silicone lubricant best for fibers and non-reactive with fibers preserving finish and hypoallergenic known to be human
  • cut of fibers: to gradually increasing lengths of approximately +2cm per each fiber - end points along the entire length of whip
  • we get our fiber directly from the best and oldest source fiber manufacturer
  • optimal softness to brittleness rating - don't snap easily at room temperature (if fibers get cold they get brittle and can snap easier)
  • purposefully don't use side sparkle fiber - leaves microslices snaps easier (you CAN d.i.y. side-sparkle if you want with sand - less damaging than razor blading it)